Wire Up the New Bench

Structured cabling run · patch-panel cross-connect · DHCP client · verify reachability
N10-007 · 2.1 N10-007 · 1.4 AP NET · 3.1 AP NET · 1.2
WORK ORDER #C-4471 · Marrow & Finch Design Studio · on-site tech A drafting workstation, BENCH-12, just moved into the Studio B bay. The wall jack there (faceplate B12) is already punched down to the patch panel in the comms closet — but nobody ran the cross-connect from the panel to the access switch, and the workstation isn't plugged in. Finish the run, set BENCH-12 to pull its address automatically, and confirm it reaches the LAN and the internet. Studio B lives on VLAN 50, configured on switch port 9.

Comms closet — cross-connect

RACK 1 · IDF-Studio

Run a Cat6 patch cable from patch-panel port B12 to a switch port. Click one port, then the other. Studio B is on VLAN 50.

PATCH PANELPP-1 · 24-port
ACCESS SWITCHSW-ACCESS-2 · Gi 1–24
terminated jack patched OK wrong port

Task checklist

    Review questions

    Score 0 / 10