NetForge · DHCP Console

Stand up a DHCP scope for the Fabrication Lab subnet

N10-009 · 1.6 AP NET · 2.2 AP NET · 2.3

You volunteer as the network steward for the Meridian Robotics Club. The club just racked a new switch for the Fabrication Lab on VLAN 40, subnet 10.40.12.0/24. The gateway 10.40.12.1 and the internal DNS resolver 10.40.12.10 are already wired up as static infrastructure. Your job: configure server dhcp-core-01 to lease addresses to the lab workstations automatically — then verify and activate the scope from the console.

Scope builder dhcp-core-01

Scope name

A label for this address pool. Required before activation.

address pool — subnet 10.40.12.0/24

Range start

Range end

Option 003 — Default gateway (router)

option 006 — DNS servers (in order)

Option 051 — Lease duration (days)

10.40.12.0pool: empty.255

Dynamic pool Gateway (.1) DNS (.10) Conflict in pool

Verification console

dhcp-core-01 console ready. Type help for commands. Configure the scope above, then run show scope and activate <name>.

Tasks 0 / 6

Check your understanding

Callsign (no real names)

Tasks 0/6 · Questions 0/4